English 
Français 
Español 
Polski I’m going to show you now how to check if the hubs and the loggers are connected to bluConsole. Let’s start with the hubs!
Hubs
Just a quick note – please wait around 20-30 minutes from the time you have connected your hub to the power source before you check your hub status on bluConsole.
In order to log in to Bluconsole, go to the link below:
Insert your username (it’s an email) and password and click the “Login” button.
In case your login and password do not work, please use the “Forgot Password” option. Fill up your email and click the “Request password” button. You should see a message at the bottom confirming the success of this action. Now go back to your email inbox and follow the instructions.
If this method does not work, please contact our support.
To check the status of your hub, first click the “Hubs” link on the left menu. Now, type your hub’s serial number under a “Serial number” label. After a moment a row should appear with your hub’s information.
Check the icon under the “Status” column to find out whether your hub is connected or not.
Legend:
A “green on” icon indicates that the hub is connected to bluConsole.
A “grey off” icon indicates that the hub is not connected to bluConsole.
If the icon indicates it is connected – well done! You can start using the hub!
In case you have trouble connecting your hub to bluConsole, first check if there is any issue with the power source. If the problem persists, please move to the Troubleshooting section of this instructions manual.
Alright! Hubs are checked! Let’s now move on to the loggers. Shall we?
Loggers
-
To check the status of your loggers, first click the “Loggers” link on the left menu. Now, type your logger’s serial number under a “Serial number” label. After a moment a row should appear with your logger’s information.
-
Check the icon under the “Maintenance mode” column to find out whether your logger is connected or not.
Legend:
A “green on” icon indicates that the logger is connected to bluConsole.
A “green gear” icon indicates that the logger is connected to bluConsole and is in the one-time maintenance mode.
A “grey off” icon indicates that the logger is not connected to bluConsole.
A “grey gear” icon indicates that the logger is not connected to bluConsole and is in the one-time maintenance mode.
If the icon indicates that the logger is connected to bluConsole – well done! You can start using it!
In case you have trouble connecting your logger to bluConsole, please move to the Troubleshooting section of this instructions manual.
