English 
Français 
Español 
Polski In this part you'll learn how to manage your loggers, set threshold limits, download calibration certificates and more!
Overview
In order to access loggers, click the “Loggers” link on the left menu.
Legend:
Maintenance mode – presents whether a specific logger is in a one-time maintenance mode or not and its current state. It comes in 4 states:
A “green” icon indicates that the logger is connected to bluConsole.
A “green gear” icon indicates that the logger is connected to bluConsole and is in the one-time maintenance mode.
A “grey off” icon indicates that the logger is not connected to bluConsole.
A “grey gear” icon indicates that the logger is not connected to bluConsole and is in the one-time maintenance mode.
Start of maintenance – presents the date and time when the one-time maintenance mode will start.
End of maintenance – presents the date and time when the one-time maintenance mode will be finished.
Certification valid date – presents date and time till your calibration will be valid. It does not refer to our Blulog certifications.
Valid thru – presents date and time till the device is still valid.
Cyclic maintenance mode – presents the name of the mode that can be created at the “Cyclic maintenance mode” page. Cyclic maintenance mode is a way to set maintenance in a recurring manner.
NOTE: In case a logger uses one-time and cyclic maintenance modes simanteneously, both of them will be used.
A logger with a maintenance mode will record data but it will not be shown in a graph or a report. Also alerts will not be triggered in case of a breach.
“3 dotted” icon – upon a click presents a small window with more options.
Edit
-
In order to edit a logger, click on the logger’s serial number. A new window should pop up where you can edit the information.
-
Once you are finished, click the “Save” button. Wait until the progress bar at the top finishes.
Limits
-
In order to set measurement threshold limits, first select the desired logger(s).
-
Then, click the “Set limits” button. A new window should pop up.
-
On this new window specify your limits and click the “Save” button. Wait until the progress bar at the top finishes.
Recordings
-
In order to access recordings data, select the “Recordings” option in a hidden menu. A new page should appear with data.
-
In order to export data to an XLSX file, click the “download” icon.
-
In order to edit the thresholds of the recording, click the “edit” icon. A new window should pop up.
-
On this new window, insert new values and click the “Save” button. Wait till the loading bar at the top finishes.
Calibration certificate
-
In order to download a calibration certificate, select the “Certificate” option in a hidden menu. A download should happen shortly.
You can download calibration certificates individually for each logger.
Other
-
In order to assign organization, hub, zone or cyclic maintenance mode to your logger(s), first select your desired logger(s).
-
Then, click the “Assign” button at the top. A new window should pop up.
-
On this new window select your options and click the “Save” button. Wait until the progress bar at the top finishes.
-
In order to replace a logger, select the “Logger replacement” option in a hidden menu.
-
A new window should pop up where you can insert a new logger’s serial number.
-
Once you are finished, click the “Save” button. Wait until the progress bar at the top finishes.
Logger replacement allows you to transfer the logger’s history and information from an old logger to a new logger. It is useful especially in case of a replacement at the end of autonomy.
